Puffy Resin Sticker Base Sheet

New , Resin Supplies , Resin Tools

#403460
JAN：4902498734602
Sticker size：Sticker/W95mm×H145mm
　　　　　　Release paper/W110×H145mm
Packaging size：W120mm×H185mm
Contents：1 pack / 3 sheets
Weight：22g
Color：Clear
Material：Sticker_PET, Release paper_Paper

Made in Japan
Release：January 23rd, 2026

480 JPY

A transparent, sheet-type, strong adhesive double-sided tape designed to help you create puffy resin stickers easily.
Perfect for preventing resin from soaking through and for keeping resin neatly in place.

Contents

  • * The image shows the sheet with release paper attached.

  • Prevents resin from soaking into paper-based stickers.

  • Film stickers can also be made into puffy resin stickers.

  • Controls the spread of resin when applied.

  • By attaching the sheet to the back of resin parts, you can easily create a drop-stype sticker effect.

Precautions for Use

・This sheet cannot be printed on. Do not use it in printers or laser copiers.
・Do not put this sheet in your mouth or lick it.
・Keep out of reach of children.
・Do not apply this sheet to the body, face, or animals.
・Do not use for electrical insulation purposes.
・Store in a cool, dry, and dark place. Avoid high temperatures, humidity, and direct sunlight.
・This sheet is a craft tool only. Do not use it for any other purpose.
・The sheet may tear durling removal, or adhesive residue may remain depending on the surface.
・Specifications and appearnce are subject to change without prior notice.

Turn your favorite stickers into puffy resin stickes! Watch the short video for easy instructions.

How to Use

How to Make Puffy Resin Stickers

Materials & Tools

When using resin, always work in a well-ventilated area.

  • 1

    Roughly cut out your design sticker together with the release paper.

  • 2

    Cut a piece of the puffy sticker base sheet slightly larger than the sticker from step 1.

  • 3

    Peel off one side of the release paper from the sheet and appl it over the design side of the sticker.

  • 4

    Trim along the shape of the sticker using scissors.

  • 5

    Cut another piece of the puffy sticker base sheet and attach it to a clear plastic folder. Peel off the release paper. This will be the base.

  • 6

    Place the sticker from Step 4 onto the adhesive base from Step 5 with the release-paper side facing up. Then peel off the release paper.

  • 7

    Apply "Star Drop" soft resin onto the sticker and spread a thin, even layer over the entire surface.

  • 8

    Cure under the UV-LED light from 5 seconds to harden the surface.

  • 9

    Apply another layer of resin on top and spread evenly.

  • 10

    Cure for 2 minutes, then flip over and cure the back for 1 minute.

  • 11

    Peel the finished piece off the release paper. Your puffy resin sticker is complete!

Go Back