Minimized shrinkage and warping. No wrinkles when cured in a silicone mold. Crystal clear resin with long-lasting non-yellowing protection.
● Cured with both LED light(405nm) and UV light(36W).
● Crystal clear resin with long-lasting.
● No wrinkles when cured in a silicone mold.
● Curing starts immediately, and is completely finished in 30-120 seconds.
● Expose front and back sides to UV light to ensure curing inside of resin.
● Minimize the curvature of the resin during curing.
● Due to low heat shrinkage of 3.5%, works well with open back bezel.
● Cure well in sunlight.
● The surface of a cured item is not sticky.
*Discoloration may occur due to aging.
UV-LED light, UV light, Sunlight
Fluorescent light, Near window (under shade)
● No Reaction
Home LED appliance
Expose the light from both top & bottom sides.
● UV-LED light (6W-9W) 30-120 seconds
● UV light (36W) 2-4 minutes
● Bright sunlight 30-120 seconds
● Cloudy sunlight 3-10 minutes
*Curing period diﬀers with size and seasonal changes.
*Take longer cure time when the colorant resin is used.
Crystal Clear Resin
Beautiful curing performance when cured in a slilicone mold.
Excellent work to ﬁt a cured resin in a frame and in an open back bezel due to the low shrinkage.
*The resin is not a glue. It may come oﬀ the frame on impact.
Minimize the curvature of resin
・Take care to avoid getting burned when curing.
・Avoid direct contact with skin.
・Should contact with skin occur, remove resin with a tissue and wash with soap and water.
・If product gets into eyes, rinse with clear water for 15 mins and seek medical attention.
・Causes skin irritation.
・Cause serious eye irritation.
・Use in a well-ventilated room.
・Store in a cool, dry area.
・Storage temperature 0-25°C
・Do not use near fire or open flame.