Joy of Creation.

How to Use

Black Work Sheet

Place a work sheet (or black paper) under the mold to see the shapes clearly.

[Work Sheet] Download

• Making Parts with Colored Resin

  1. 1. Put UV-Resin and colorant into a mixing palette, and stir well with a stick to create colored resin.
  2. 2. Put the colorant little by little with the stick.

     

  3. 3. Finaly, fill to the rim with UV-LED Resin and cure thoroughly.
     After cooling slightly, gently remove from the mold.

• Extra: Drawing on Parts or Plates with Pens

  1. 1. Fill the mold with clear resin, cure with light, let it cool slightly, and gently remove.
  2. 2. Draw or color on the front or back surface with a pen.
  3. 3. Once the ink has dried, coat lightly with resin and cure again for a grossy finish.
  

  Use Copic Acrylica

  Pens You Can Use

  ●Pigment markers(Copic Acrylica, POSCA,etc.)　
  ●Resin Pens
  Some pens may not write smoothly on cured resin.
  Not all pens have been tested.

• How to Decorate Plates

  1. 1. Make a plate with UV-LED Resin (same as "making parts").
  2. 2. After curing, remove plate and parts.
     Glue parts on the plate.
     Once dry, coat with resin for a glossy finish.

How to Use Base Parts^★

★The mold includes areas to make base parts.

1. 1. Make accessory base parts with resin.
2. 2. Attach it to the back of parts with a little resin as shown in the drawing.
   Coat the entire back and cure it again.