Release on Friday, November 19th, 2021
patent pending
480 JPY without tax
Item#:403340
JAN:4902498733407
■Sheet Size (W100 x H148mm ) x 5sheets
■Inkjet printers(dye & pigment ink) / color laser printers
1 set / color:white / weight:28g
Sheet size:W100 x H148mm
Packaging size:W120 x H185 x D2mm
Material:PET
・water-based pen ・oil-based pen
・ball point pen ・alcohol maker
・watercolor paint ・acrylic paint
・friction pen ・oil paint ・creyon ・pastel
・Black solid coating material may not be transferred well.
・Color may change due to the heat of curing.
Print photos and illustrations on the sheet with a home printer and transfer them to resin.
Prepare data of photograph or illustration. Set the transfer sheet on a printer. Print the image on a rough surface of the sheet.
Apply a thin layer of resin on the image. The printed surface is easily scratched, so be careful not to peel it off with a stick.
For bubbles,
Take time to remove bubbles with a stick or a pin.
Leave it for about 10 minutes in a place out of the sun until the resin is penetrated to the sheet.
Expose it to UV-LED light to cure resin. After curing, peel the back paper off sothat the transferred image appears.
Fix the transferred piece curls
Put the resin piece under something weightly like a book while the cured piece is a little hot.
Whiten the back surface for clear appearance.
Whiten the back of the resin to make the image stand out clearly.
Items suitable for white coloring
・Acrylic paint
・Marker white
・White-out
Coat the back side with resin and cure it completely.
Draw illustrations direct on the transfer sheet with pens and transfer them to resin.
※Depending on the ink, discoloration may occur due to aging.
※Draw illustrations direct on a rough surface of the transfer sheet with pens and dry the ink well.
※See "Pens that can be used for the sheet"
Apply a thin layer of resin on the illustration and leave it for 10 minutes.
For bubbles,
Take time to remove bubbles with a stick or a pin.
Expose it to UV-LED light to cure resin. After curing, peel the back paper off so that the transferredillustration appears.
Fix the transferred piece curls
Put the resin piece under something weightly like a book while the cured piece is a little hot.
Coat the back side with resin and cure it completely.
Put accessory parts on.
Make a small hole with a pin vise to set jump rings.