Ore-like Necklace
Designed by Kimura Premium

UV-LED Resin "Star Drop" hard
White & silver glitters
Spring clasp
Oval jumprings

UV-LED handy light
Mixing palette
Mixing stick
Clear silicone mold making
Paper box for clear silicone gel
Paper cup
Vinyl gloves

  1. 1.

    Use a double-sided tape, fasten the stone to the box, with the flat side facing down.

  2. 2.

    Measure A liquid 20g and add B liquid 20g in a cap.

  3. 3.

    Mix A & B well with spatula, and pour the liquid enough to cover the stone.

  4. 4.

    Curing starts in 30 minutes. It takes 24 hours to cure completely.

  5. 5.

    Take the stone out and an original mold is ready.

  6. 6.

    Prepare resin mixed with 2 glitters.

  7. 7.

    Pour the glittered resin at the shaper side while tilting the mold by hand.

  8. 8.

    While leaning, cure it for 30 seconds. Then cure it under the light in a minute.

  9. 9.

    Pour a tiny amount of resin in the mold and cure it in a minute to make a slight surface.

  10. 10.

    Drop resin first. Place one end of chain as zigzag line and cure in a minute.

  11. 11.

    Stay beads with a small amount of resin by curing, repeat that until it is filled up.

  12. 12.

    Take it out from the mold. Chain oval jump ring and spring clasp with pliers for ore-like necklace.