"Flower" clear intermediate reddish color dye liquids to tint for resin. 5 spring colors are in the set.
・New 5 spring colors: pure white, lemon yellow, sunset orange, salmon pink, and deep red
・Good for the expression of the sky at sunset and flowers
・A fine nozzle avoids over dropping pigment
・Mix well with UV-LED resin for high transparency
〇 UV-LED resin, 2 epoxy resins
△ Silicone, Polyurethane resin
*test before use.
✕ Raw clay, water, ethanol, water base varnish, oil base varnish
・Drop a proper amount and stir it well. If bubbles appear, remove them before curing.
・Too much pigment cannot cure the resin.
・Avoid direct contact with skin. If it occurs, remove with a tissue and wash with soap and water.
・Be careful not to get colored to clothes, furniture. If it does, it might come out with dehydrated ethanol depending on the material.
・Remove overflowed colors with a tissue before closing the cap.
・Ventilate a room．
・Tighten a cap properly after use.
3ml mini bottle with a fine nozzle
Avoid over dropping dye.
Shake a bottle well before use.
1.Put 1 – 2 drops into resin and stir it well with a stick.
Add another drop if needed for darker.
2.Pour the resin to the mold and cure it under the LED light.
The color displayed on the chart may slightly differ from that of the actual resin due to factors such as lighting, printing quality, or the color density.