Jewel Color for UV & UV-LED Curing Resin [Pearl Greige]

Pigment Liquid , Resin Pigments

#403254

JAN:4902498732547

Bottle size:φ18mm×H56mm
Package size:W60mm×H100mm×D18mm
Volume:5ml
Color:Pearl Greige

Made in Japan
Release:July 20th, 2018

540 JPY

Colorant for tinting UV & LED curing resin. 10 pearl colors are available.

The pearl color liquid is mixed well with resin and has a beautiful pearl colored resin.
Different colors can be mixed to create the preferred color.
The color in the pearl series can be tapped direct to the surface of resin parts and clay accessories.
The optional product "Pon Pon Attachment" is a useful tool for tapping colors.
Best use with UV-LED resin and 2 part epoxy resin.

Tapping Color Sample with Pon Pon Attachment set

Finished color be changed depending on the surface color.
Below shows the difference.

  • No tapping color, just cured.

  • Tapping on the first ball

  • Tapping on white surface

  • Tapping on black surface

How to Use

Single color

  • 1

    Put a drop of pearl color into resin.

  • 2

    Stir it slowly to avoid trapping air inside.

  • 3

    Colored resin is ready to pour and cure.

Multiple colors

  • 1

    Add second color into colored resin.

  • 2

    Stir it slowly to avoid trapping air inside.

  • 3

    Multiple colored resin is ready to pour and cure.

Coating

  • 1

    Choose puff size small or large, take a release paper on back.

  • 2

    Wipe dirt off the nozzle and set an attachment.

  • 3

    Set the puff on top.

  • 4

    Take color in pallet or clear folder and immerse the color into puff.

  • 5

    Place a piece on stand.

  • 6

    Color by tapping soft. Do not put a lot. Little and thin over coating.

  • 7

    Dry it for 30 – 60 minutes after coloring.

  • 8

    Repeat step 6 and 7 until preferred color appears.

  • 9

    Wipe color off puff with tissue and cap and keep it.