Emerald green colored ore earrings

Productsʼ information above is updated in November 2023.

【Material】
UV-LED Resin Star Drop Hard
Jewel Color Birthstone Color Set［1-6］
Tafrect Mold［Mineral D］
UV-LED Lamp
Handy Heater
Mixing Palette
Mixing Stick
Shading Case
Resin Cleaner
（ethanol diluted 2x with water)
Permanent maker pen［Gold］
Straight pipe accessory parts
Eyebolts
Eye pins
Earing parts
Pin Vise
Tweezers
Pliers
Nippers

  1. 1.

    Put 3 drops of emerald green into star drop resin.

  2. 2.

    Mix it well with a stick.

  3. 3.

    Use a handy heater to remove air bubbles.

  4. 4.

    Place in a case to prevent exposed to light and cool it down.

  5. 5.

    Pour the green resin into the mineral D-a mold.

  6. 6.

    Cure it under UV-LED lamp.

  7. 7.

    Cool it down first, then soak the cleaner between the mold and the resin to make it easier to remove.

  8. 8.

    Use a pin vise to make a hole.

  9. 9.

    Put resin on the eyebolt and insert it into the drilled hole to cure and adhere by light.

  10. 10.

    Paint the top of the part with a gold pen and let it dry.

  11. 11.

    Connect the parts through 9 pins in a straight pipe.

  12. 12.

    Connect earrings and fittings.

Go Back