Joy of Creation.

Samples
resin piece with lame and holo frakes

Features

• ■Low viscosity flowing liquid resin
• ■Hard finish and scratch resistant
• ■Easy to apply thinly
• ■Less unpleasant odor characteristic of resin
• ■Quick curing time
• ■No stickiness after curing due to coating
• ■Yellowing-resistant coating resin*
• ■Beautiful finish when dipped directly into the liquid.
• ■Brush marks do not stick to the surface, and even can be applied even the detailed areas
• ■A small amount can be put out with a nozzle

*Discoloration characteristic of resin may occur due to aging.

Coating liquid for thin coating.
It is not suitable for thicker works.

Curing Time

• ■UV-LED light (6W-9W)　30 - 120 seconds
• ■UV light (36W)　2 - 4 minutes
• ■Bright sunlight　30 - 120 seconds
• ■Cloudy sunlight　3 - 10 minutes

*Curing time depends on the work environment.

Caution

• ■Temperature becomes high during curing. Do not touch it until it cools down.
• ■Take care to prevent the resin from adhering to skin, clothing, furniture, etc.
• ■Coating liquid for thin coating.　It is not suitable for thicker works.
• ■The resin begins a slow curing reaction even under fluorescent light in a room or in the shade near the window.
• ■Do not leave this resin out for long periods of time.
• ■People with sensitive skin or those working in environments requiring caution should wear gloves and glasses.
• ■White gas may rarely occur during curing.
  This is due to the reaction of some of the resin components to vaporization caused by the curing heat. It is not particularly harmful.
  Please ventilate as usual.
• ■When applied to Moon Drop resin, the film may peel off due to its unique surface hardness. It is recommended to scratch the surface with sand paper #600 - #1000 before application.

For matte type, shake the bottle gently and slowly before use.
If not used for an extended period of time, the matting agent will precipitate. Use the included flocking tip to slowly stir the mixture before use.